8m Solar-powered Street Lamp Used for Pathway, Fans for Tucson Expert Solar

Solar LED Light Fixtures Manufactured in the US Overhead Solar LED Light Fixtures. Overhead solar light fixtures are perfect for highways, freeways, neighborhood streets, parking lots, rural roads, parks, boat ramps, pathways, perimters, jogging paths, security lights and many other applications. [PDF] Figure 3: Turtle Mountain Band of Chippewa Street Light Path (www.googleearth.com) 2. Street Lighting Street lighting has been around since humans began living together. As early as 500 BC, the ancient Romans used oil lamps filled with vegetable oil in front of their homes. In 1802, William Murdock used a gas light fueled with coal gas.

Can a 120-volt standard lamp be converted to run off 12V dc?

yep as long as you have a 12v supply and a 12 v bulb, wireing dosen,t care, screw the bulb into the socket attach the 12v supply to the plug,

i have to do a science experiment and i need an household alternative to a heat lamp.?

Ordinary bulbs give off a fair amount of heat

can u keep snakes in garages if the heat lamp is kept on all the time?

yes,but you do have to have a heat mat under the cage because, the heat lamp doesnt provide much heat. snakes dont need a light but you can add them. i feed mine about once a week

What kind of lamp do I need for my turtle?

i think it depends on the breed, i have a horsefield tortoise and his heat lamp is a 40 watt and mines is just regular clear colour not red or blue

Do goldfish need a light above them like a lamp?

Goldfish Light Requirements

Puppy whose cast was removed must now wear lamp shade like collar. How does this work for eating, sleeping..?

placed it in a huge, black rubbish bag. upload a million to a million a million/2 cup yellow corn meal. close the remarkable of the bag, and SHAKE. Shake the bag somewhat hard, for as long as you may. The gentle abrasiveness of the corn meal gets rather some the dirt and airborne dirt and dirt off or loosened. once you are completed shaking it interior the bag, take the coloration out and vacuum it properly. This technique additionally works properly for synthetic fabric/silk vegetation.

can my beardie survive without his heat lamp ?

He will get sick and eventually die. They bask in the sun for a reason. The heat gives them energy and keeps them healthy. You really need to invest in a heat lamp asap! Its been months?! Wow! You could have saved enough money by now

how many watts should my iguanas heat lamp need i have a 50 and a 67 watt bulb but i dnt kno wich 1 to use?

I would use the 67 but only during the day and at night use a heat mat or a black/red bulb. I would recommend getting a higher one maybe 120 watts when he starts to get larger

How long does it take an electron to travel from the outlet to the lamp?

like .oo1 second

Is a Coralife hood lamp with a 50/50 65 watt bulb too much light for a 17' deep 30 gallon tank with plants?

no it's not (too much that is)... change the bulb though.. a 50/50 wont really grow any plants look for more of a 5,800K or 6,700K

Should I get a lamp for my small betta tank?

Hi, I have a beta fish myself! I think the best thing that you can do is put it in a small/medium fish bowl rather than a small tank. The one I use has colored stones at the bottom (marble like) and also a fake plant. My fish has been living for 5 years and shows no sign of being sick. This is a better option than the tank, because the light could be harmful to this fish. Also, try to avoid placing the clear bowl near mirrors/reflective objects, because the fish may grow hostile at the sight of it's own reflection! Good luck:)

Is it possible to change the color temperature of a linear fluorescent lamp by dimming it ?

what about using coloured cellophane it will resist the heat of a flourescent and there are many different colours to chose from as well as how much is used along the length,its difficult to dim flourescent lights but not imposible with special circuits-as much as i know?

GET IN TOUCH WITH Us
no data
recommended articles
News
Development Direction of Solar Street Lamp Manufacturers
Development Direction of Solar Street Lamp Manufacturers
There are many solar street lamp manufacturers. In the face of fierce competition in the industry, solar street lamp manufacturers have to face some problems if they want to develop. If they want customers to find you or patronize you again, the premise is that you are a good manufacturer in all aspects, What kind of development direction should solar street lamp manufacturers have now?If the solar street lamp price has an impact on customers, it can only be that the solar street lamp manufacturer has not really succeeded. Because the price war is never an inevitable factor for the development of manufacturers. Today, you can give customers a very low price and reduce the street lamp price by reducing the Watts actually needed by customers. It may not be guaranteed that another manufacturer will use the same method to reduce the price and attract customers. You are lowering the price, and your opponent is also lowering the price. In this way, long-term development will only hurt both sides.Therefore, the price war is not the correct development direction of solar street lamp manufacturers. The correct direction should be to focus on product production, improve product quality and cost performance, and do a good job in after-sales service at the same time. It's like a 99 yuan smartphone and a Samsung phone with hundreds or even 3000 yuan. There is a big difference in price, but we still choose Samsung phone because of its high brand, good performance and cost performance in all aspects. Therefore, the development direction of solar street lamp manufacturers should not tangle in price, but do a good job in their products and improve their brand.
I Would Like to Ask What Are the Ways to Improve the Brightness of Solar Street Lamps?
I Would Like to Ask What Are the Ways to Improve the Brightness of Solar Street Lamps?
I would like to ask what are the ways to improve the brightness of solar street lamps?1. Determine the brightness of LED solar street lamp before purchaseBefore purchasing solar street lamps, if it is a large number of recycling, the best thing is to choose manufacturers with industrial plants and drive to the processing plant to have a look. If you decide where to buy, you must talk to the other party about the regulations on chromaticity. If you don't have much definition of this chromaticity, you can let the other party make a sample to have a look.If the requirements for chromaticity are very high, the size of LED light source should be larger. Some manufacturers will choose the most suitable scheme for you out of your own consideration. If it is not particularly bright according to your specific situation, you can also listen to the manufacturer's suggestions.2. Lower the LED solar street lamp equipmentIf solar street lamps are to be installed on both sides of the road, we should fully consider whether there are green plants on both sides of the road. Because the solar street lamp is converted into electromagnetic energy by digesting and absorbing solar energy, if something blocks it, the actual effect is undoubtedly impossible to be very good. When such a situation does occur, why not reduce the height of the solar street lamp and not completely cover the solar panel.3. Query LED solar street lamps on timeMany solar street lamp projects are not easy to hold meetings after the equipment is good, which is naturally not very good. Although solar energy does not need maintenance or cleaning by full-time personnel, it must be queried on time. The damaged position should be repaired immediately. If the solar panel has not been removed for a long time, it also needs to be inadvertently scrubbed.
Technicians Tell You: What Is the Construction Scheme of Solar Street Lamps
Technicians Tell You: What Is the Construction Scheme of Solar Street Lamps
Today, solar street lamps not only illuminate the road for people, but also save energy consumption for national energy consumption. They are not only environmental protection products, but also cost saving and contribute to the country.1. Selection of disassembly and assembly location: the disassembly and assembly location shall be near the installation location to facilitate transportation after assembly. In addition, the installation point shall be paved with rainproof cloth to place the wear, scratch and stain caused by the bulge or fine sand and stain on the ground.2. Installation personnel and tools: there are 3-6 professional installation personnel (personnel can be appropriately increased for heavy installation tasks), and each person is equipped with a set of installation tools, including a multimeter, a large movable port (installing anchor nuts) and a small movable port (installing other nuts), a flat screwdriver, a triangular lock tooling, a cross screwdriver and a pointed nose pliers, several rolls of insulating tape and waterproof tape, etc. In addition, there must be a crane and a lift truck.3. Count the lamps according to the delivery list: disassemble and check all parts one by one with reference to the packing list, and check whether there is any damage such as collision, wear, deformation and scratch. The installation of unqualified products is prohibited.4. The lamp pole components and easily worn accessories (components and lamp caps) must be padded with soft pads to avoid unnecessary damage such as scratches during installation.5. When the lower lamp pole assembly is placed, its upper end must be supported by an iron frame to facilitate the installation of the upper lamp pole assembly.1. Assembly of lamp pole assembly: upper lamp pole assembly, lower lamp pole assembly, lamp arm assembly and solar cell assembly fixing structure.A. Install the lamp arm: bind the exposed sheath wire end on the lower lamp pole with thin iron wire and wrap it with black tape: the other end of the thin iron wire passes through the lamp arm assembly; Slowly pull the thin iron wire at the top of the lamp arm assembly so that the thin iron wire with the movable sheath wire passes through the lamp arm assembly. At the same time, the lamp arm assembly gradually approaches the lower lamp pole until the panel on the lamp arm is aligned and close to the lamp arm boss on the lower lamp pole, and then fasten the lamp arm assembly on the lower lamp pole with appropriate bolts; When fixing the lamp arm assembly, avoid squeezing the sheath wire, resulting in damage or even cutting of the sheath wire skin; Disconnect the thin wire from the sheath.B. Installation of lamps (equipped with equal source): close the opened lamps to the upper end of the lamp arm, and the exposed sheath wire passes into the lamps from the tail of the lamps; Pull the sheath wire and insert the lamp into the lamp arm at the same time. The overlapping length of the two is 150mm; Connect the sheath wire to the wiring terminal inside the lamp, and pay attention to the correct positive and negative wiring during wiring. Rotate the lamp with the lamp arm as the neutral so that the lampshade is facing the ground, and then fix the lamp on the arm; Turn off the lights.C. Pole assembly on assembly:1) Fasten the bracket assembly and corner post on the upper lamp post assembly in turn, and the threaded connection parts shall be stressed evenly and fastened; While connecting the support and the angle steel frame, use fine iron wire to lead the sheath wire from the lamp pole to the angle steel frame through the support assembly;2) . place the component guard in the angle steel frame, and then place the component on the guard; When placing the components, the junction box shall be at a high place. When the components are placed horizontally, the junction box shall be close to the light pole assembly;3) . connect the components according to the system voltage and component voltage of the street lamp. If the system voltage of the street lamp is 24V and the component voltage is 17V or 18V, the components shall be connected in series. The series connection mode is that the positive pole (or negative pole) of the first component is connected with the negative pole (or positive pole) of the second component. If the component voltage is 34V, the components shall be connected in parallel, The parallel method is to connect the positive and negative poles of the first component and the positive and negative poles of the second component correspondingly. When connecting, press the small slotted screwdriver to the terminal of the junction box. The red wire is required to connect the positive pole and the blue wire to the negative pole. After wiring, fasten the anti nut at the outlet end of the junction box, and apply 7091 sealing silica gel at the terminal of the junction box, The amount of glue shall be subject to the complete sealing of the incoming line in the junction box, and then the junction box cover shall be fastened without reverse buckle.4) Use a multimeter to detect whether the component wiring (connected to the controller end) is short circuited, and also to detect whether the component output voltage meets the system requirements. In fine weather, the open circuit voltage shall be greater than 18V (system voltage is 12V) or 34V (system voltage is 24V). After installing and testing the components, the power line is connected to the positive pole of the controller end, and the exposed wire core shall be wrapped with insulating tape, which shall be wrapped in two layers;Note: the components shall be handled with care during installation to avoid damage to them by tools and other instruments.5) , components and component supports are fastened with M6 * 20 bolts, N6 nuts and washers 6. During installation, the bolts shall be installed from the outside to the inside, and then the washers shall be sleeved and fastened with nuts. During fastening, the bolt joints shall be firmly connected without looseness.
This Can Be Done When the Solar Street Lamp Cannot Work (I)
This Can Be Done When the Solar Street Lamp Cannot Work (I)
1 Power loss of solar street lamp: the power loss of solar battery is due to the quality problem of the battery itself. The cheapest one is 2-3 yuan 1Ah. Generally, this is not very reliable. Problems continue to occur after using it for about a year. Therefore, to solve this problem, replace the solar battery and replace it with a better manufacturer, If it is a northern city, it should also be noted that the battery must be buried below the frozen soil layer, especially in cold places. Thermal insulation cotton should be added to the battery, because the capacity of solar energy storage battery has a great relationship with the external ambient temperature.2 The LED light source of solar street lamp is not on: it may be the most direct way for the performance of solar street lamp. The solar street lamp system is abnormal, that is, it is not on. One of the reasons why the solar street lamp is not on may also be the problem of LED light source. As a general purchaser, it is difficult to distinguish high-power LED light source. If the solar street lamp is not on, You can simply check the light source by yourself. If the system is small and the system voltage of the light source is 12V or 24V, the conventional configuration is used. The best way to detect the light source is to connect the battery directly to the light source. If the light is on, it proves to be normal.For more questions, please click the right figure to consult online customer service.
no data

Contact Us

Copyright2021@KemecoLighting

Service Support

kemeco@kmc-ltd.com

 Copyright © 2021 Kemeco |Sitemap