How to Make the Waterproof for Outdoor Solar Lights?

Recently, it is the period when the autumn is slowly turning to the winter, and the amount of rainwater is obviously increased. When using outdoor solar lights, it is necessary to ensure that the waterproof performance is good. If the outdoor solar lights is not waterproof, the outdoor solar lights will not be bright and a short circuit will occur. Heavy rain enters the interior of the outdoor solar lights head, corroding the internal wires, making the wires contact with the lamp post, thus affecting peoples safety. Therefore, it is necessary to do waterproof work of solar powered outdoor lights. The solar powered outdoor lights is mainly composed of a street lamp pole and an LED street lamp lamp head. The solar powered outdoor lights pole is generally made of an overall hot-dip galvanizing spray treatment, and does not seep water. Solar powered outdoor lights manufacturers need to pay attention to the waterproofing of best outdoor solar lights heads. Only the waterproof work of the lamp heads can ensure the stability and safety of best outdoor solar lights at night. The following small series will tell you how to do the waterproof work of best outdoor solar lights.1. The design of the best outdoor solar lights shell can not be recessed. Try to use the upper wire through hole style, which is beneficial to the rapid evaporation of water from the solar system led light housing.

2. Solar system led light chip, lens should consider their waterproof performance, to achieve IP65 level. The rear cover of the lamp head, the back cover of the power supply box, and the threading hole in the power supply box are respectively designed with waterproof sealing strips and waterproof plugs with good sealing performance.3. Need to do the aging test of LED street lamp head. The waterproof strip at the internal connection of the LED street lamp has a service life, and the sealing may be lowered at a joint after several years. Therefore, solar system led light manufacturers should do aging inspection after production to test their waterproof performance and ensure good waterproof performance for at least 5 years.The above are three ways to do waterproof work on solar system led light. Of course, when you buy led street light solar system, dont choose the products produced by small workshops. Because the production equipment of small workshops is small and the process is poor, most led street light solar system are not good for waterproof work. It must be done from regular LED street lamp manufacturers. Buy, it is best to remind everyone not to buy LED street lights in incredibly cheap!

HOT PRODUCTS
no data
GET IN TOUCH WITH US
recommended articles
News
Seeing Northern Lights in Scotland
The thing you need to understand is that the Aurora Borealis tends to occur in an oval over the North Pole. Based on how strong is the aurora (KP number), the further south the aurora will be visible.Take a look at a KP number chart, such as here, you will see that a fairly strong aurora, KP-5, is required to see the aurora in the northernmost UK, while a much weaker KP-2 aurora will be visible in Iceland, where they are fairly common in winter.This means that auroras in Scotland will be fairly rare and unimpressive. You really need to be as far north as possible and get fairly lucky. You will have much better luck in Iceland or northern Scandinavia.Last winter, I saw the aurora in Alaska here in the USA. We were in an about comparable viewing situation as Iceland. We were there for 4 nights, which were KP-1 and 2 and we were able to see the aurora only one of those nights. Those same nights, you would have seen nothing in the UKNorthern lights are apparently visible in Scotland according to numerous websites. While locations do vary, most seem to say that northern lights are visible pretty much anywhere in the country. What they do not say is how often are they visible.Suppose I am looking to visit Scotland 6-7 weeks after the fall equinox to coincide with the November new moon, what are the chances that northern lights would be visible some nights from Scotland? I will gladly adjust my location within the country accordingly, if some places are more likely to see this phenomenon.Thus the question is: How likely is one to see the northern lights in Scotland between the end of October and mid November? Also, where within Scotland would the likelihood be greater?·OTHER ANSWER:Northern lights are apparently visible in Scotland according to numerous websites. While locations do vary, most seem to say that northern lights are visible pretty much anywhere in the country. What they do not say is how often are they visible.Suppose I am looking to visit Scotland 6-7 weeks after the fall equinox to coincide with the November new moon, what are the chances that northern lights would be visible some nights from Scotland? I will gladly adjust my location within the country accordingly, if some places are more likely to see this phenomenon.Thus the question is: How likely is one to see the northern lights in Scotland between the end of October and mid November? Also, where within Scotland would the likelihood be greater?
Solar Street Light for the Home and Business
The introduction of solar street lightSolar street lights are a great solution for urban areas, as they can replace the need for electricity.The introduction of solar street light is not only to meet the demand of the users but also to help people save money on their energy bills. The introduction will be done through various ways, like a series of solar street lights around the city and along our highways. It will also be implemented by setting up mechanism like "Solar Street Lights" or "Digital Citizen's Grid".Tips for solar street lightSome cities have already started installing solar street lights to put the solar power on the streets. However, they are still far away from being fully functional. As a result, they often need some manual work done by a maintenance man.How to use solar street light?How does a solar street light work?The specifications of solar street lightSolar street light is a type of lighting system that uses solar energy to produce light. The technology has been around for decades and we can rely on it to provide electricity for our homes, offices and even the streets. However, these solar street lights do not have a long lifespan. They require constant maintenance as they need to be replaced when their efficiency drops below a certain level (around 30%).The product instructions of solar street lightThe instructions of these solar street lights are important. They tell the consumers what to expect when they are buying a product and help them make smart choices.Not only do the instructions help in making smart choices but they can also be used to increase brand loyalty and improve customer satisfaction.The application of solar street lightIn the last two years, solar street light installation has become a popular and efficient method for power generation. This is because it can be installed on the roofs of residential or commercial buildings. It works when the sun shines on the roof and creates power in an efficient way.
How to Kill Wasps That've Built a Nest INSIDE My Sealed Solar Garden Lights?
once you progression the nest it many times dies anyhow. it incredibly is not something greater effective than a brood chamber for the queen wasp and something of the wasps are her infertile daughters. the employees do not lay eggs themselves. Use the spray and be careful to not get stung1. Broke one of my neighbors outdoor garden lights, how do I cover it up?Well, consider where you can put the blame. Man, wife, kids, dog. Figure out the most likely person other than the bratty teenager and the basketball. What I think may work is if you can steal a drone from one of your friends and leave it in their yard near the broken light. Be sure and write his name on the drone. Then in a few days tell him that the neighbors have his drone and let him go get it2. How to Choose the Perfect LED Garden LightsHow to Choose the Perfect LED Garden Lights Garden lighting is an important aspect of every home exterior lighting design, so it goes without saying that choosing the perfect LED Garden Lights requires careful consideration. Establishing the overall purpose of the garden lighting solution should be an important consideration within your lighting design. Is the primary purpose safety related? Or efficiency? Or the visual appeal of your garden? Understanding the "why" of your garden lighting needs will allow you to plan effectively, and choose the perfect products. Consider the following when selecting the perfect LED garden light setup: 1. Showcasing One of the primary purposes we see LED garden lights used for, is to illuminate or showcase the garden, and rest of a home's exterior after dark. Many backyards are created for entertaining, and LED garden lights add a flare that gets noticed. To create a more stunning effect consider the quality of your lighting, and opt for products which have an appropriate lumen flux for your specific area. 2. Safety By utilising LED garden lights in both front and back areas, you can add to the safety of your home's exterior. LED garden lights will help you ensure that steps, pathways and any other uneven surfaces can be properly illuminated - eliminating any safety risks that may be inherent. 3. Efficiency Having the most efficient garden lighting solution guarantees that you will be replacing less bulbs over time, and therefore saving the most money possible on your LED garden lights. With lifespans up to 50,000 hours, you are bound to save yourself on the time and effort of replacing inferior globes. 4. Ease of movement Another often overlooked consideration is - will your LED garden lights be easy to move if needed? By utilising products such as LED Garden Spikes, you can assure that your lighting solution in your garden is transportable and versatile - allowing it to be adapted as you need it to be. This ranges from making small angle changes, to larger placement changes - such as your planting strategy evolves; meaning your LED garden lights can be as flexible as you need them to be. Selecting the best LED garden lights to suit your garden, whether it be domestic, industrial or commercial requires some thought.3. How should I landscape this?sounds like more of a decorating question than a landscape one. I would split it into three areas. a 10X20 carport type shade structure on one end with a picnic table beside it. a fire pit with lawn chairs on the other end. String up garden lights inside the 10x20 and bring power out with an extention cord for a portable sound system. pillows and some old carpet in the 10x20 if you want chill space. use the center lawn space for volleyball net or other lawn games.4. Solar garden lights, how do I choose and install the right one?Elroy, what you need to do is to read some reviews my friend. The best places are amazon and some other independent websites. Look for 5 start products and you can'y go wrong.5. 10 of the prettiest solar garden lights from under £25Many of us have been updating our patios and getting ready to fire up the BBQ to invite our friends and family over as we enter spring and summer. The next step is to turn your balcony or outdoor space into a wonderland of pretty fairy lights with eco-friendly solar lights to illuminate and warm up your garden. The low-maintenance lighting is perfect for enhancing the ambience outside and it can brighten and complement the smallest of outdoor spaces. Here are some of our favourite lights below...
Why Are Home Depot Solar Street Lights Popular?
The advantages of home depot solar street lights are of course many:1.Home depot solar street lights is energy-saving: Solar energy is used to provide electrical energy, which is inexhaustible and inexhaustible;2.Home depot solar street lights is environmental protection: no pollution, no noise, no radiation;3. Home depot solar street lights is safety: No accidents such as electric shock and fire;4. Convenient: Simple installation, no need for wiring or "opening up" to dig the ground, and no concerns about power outage and power limitation;5.Best solar led street light have Long service life:The best solar led street light product has high technology content, the control system and accessories are international brands, intelligent design, and reliable quality;6. Best solar led street light use high grade: technology products, green energy, the users pay attention to technology, improve the green image, and upgrade the grade;7.Best solar led street light is wide application: Solar energy originates from nature, so it can be used in places where there is sunshine, especially suitable for green space landscape lighting equipment, high-end residential and outdoor lighting, coastal landscape lighting and decoration of tourist attractions, industrial development zones, industrial and mining enterprise street lights , outdoor lighting of universitiesSolar Street Light Information-how To Choose The Best Solar Led LightsHow to Choose the Best Solar LED Lights for Your Garden So you want to buy lamps for your garden! Perhaps, you wish to highlight the elements of your garden. Maybe, you want to add ambiance to your outdoor space. No matter the reason, buying outdoor lamps can be an expensive proposition. Your budget could be hurt if you have a bigger garden. So how can you resolve this issue? The best answer would be a solar LED light for the garden. However, buying the right lighting can be a task. If you do not know how to choose the best garden solar LED light, here are handy tips that should help out. Tips to get the best solar LED lights In recent years, solar LED lighting technology has improved to a great extent. This is why many folks are switching from mains powered lamps to solar lighting. However, when you decide to go after this innovative option, you may want to take into account the following important things. So you've to take into account the type of bulb you need. Most of the solar-powered lamps use LED technology to generate light. These bulbs are extremely effective as they emit enough light and generate less heat compared to other bulbs in the market. That also means they will last longer with less battery charge. Since solar energy is stored in a limited quantity, such bulbs are highly recommended. Plus, energy-efficient garden solar LED light wo not lose energy like other outdoor lamps. As such, you can be sure that your landscape will stay illuminated for a long time period. No matter how efficient solar lights are, they will illuminate the space as long as they are charged. Once the charge is used up for illumination, the light wo not turn on. You ought to have the lamps charged all the time or at least for a longer time. So how can you do that? Removable lithium-ion batteries would be the best answer to this question. They are easy to replace. Also, they can be charged with the mains power in case the power of your solar panels gets exhausted. Additionally, removable batteries are easy to maintain. If a solar lamp is under-performing, the main culprit is the battery. In such a situation, you can take out the batteries and charge them for optimum performance. If the batteries are spoiled, you can replace them with the new ones. Such batteries are really beneficial during cold and wet seasons when there's little to no sunlight for sustaining the energy needs of your lamps. Another important point worth noting is to charge the batteries fully before putting them in the bulbs. In addition to this, make sure to have a duplicate set of batteries. That will ensure uninterrupted lighting supply from your garden solar LED light. When one set of batteries is in use on the bulb, the other set is getting charged Some solar LED lights have just one setting - a manual on/off switch. However, certain lights are more versatile and come with an automatic on/off switch. The switch turns on the bulbs in the evening and turns off when the sun rises. It's better to consider an automatic switch because you do not need to worry about forgetting to switch off the light in the morning, which could drain out the battery. Another important feature to consider is the dimming setting of the solar LED light for the garden. Certain bulbs have the dimming setting which allows you to decide the amount and level of brightness you want according to your needs and battery status (the charge in the battery). When you are choosing solar lighting for your landscape, you may want to consider powerful, efficient photovoltaic cells. These cells convert the light energy from the sun into electrical energy, which actually charges the batteries of your bulbs. Powerful cells are capable of converting more light energy into electrical energy, thus giving you more charge for the batteries. In the end, you have a better performing bulb, which means you have a brighter light for a long time. Different solar lights are available for lighting different areas of your garden. For example, accent lights produce an ambient light that lit up a smaller area. Such bulbs essentially highlight particular elements of a garden. For instance, accent lights can throw light on flowers in your garden to give better visuals at night. On the flip side, landscape lighting presents a spotlight for highlighting a larger feature of your lawn. These bulbs might be set along a tree to light it from various angles during the night. It's advised to choose LED lights depending on the functions you want them to do. A set of accent and landscape lights will make a perfect blend to ensure functionality all over the landscape. Of course, you want to add an element of style to your garden with lighting. So do not forget to match the new lighting with the style of your lovely landscape. Go for designs and colors that line up with the atmosphere of your beautiful lawn. Bulbs by themselves are fragile. In spite of this, some models are better than others. You want to buy lamps that will serve you for a longer time frame without wearing out. So do not forget to check the longevity of the bulbs in question. You can scan reviews and ratings of the bulbs to ascertain their longevity. Obviously, you do not intend to shell out too much money on solar LED lighting. So make sure you check the price of the bulbs. While you may wish to have low-priced lamps, do not go after cheaper models. Rather, try to have the right balance between quality and pricing. Explore good-quality bulbs that come with an affordable price tag. Buying solar lights for your lovely landscape is not an issue. However, picking the best garden solar LED light takes time and efforts. Yet, your efforts will be rewarding in terms of low cost, low maintenance, eco-friendly lighting, and a lot besides. But with alltopgroup light on your side, selecting high-quality solar lighting becomes easy and hassle-free.
Solar Lights Explained
Solar lights use the sun's energy as their source of power, instead of electricity from the power grid. These lights have several advantages compared to the normal electricity-powered systems. Benefits include lower operating costs, less wiring, eco-friendly operation, and much more. Whether you're looking for garden lighting or solar security lights, this article gives you all the basic information to help you pick the right technology for you.Basics: How Do Solar Lights Work?A complete unit consists of a photovoltaic panel, storage battery, lamp, stand or fixture, and a box-type housing to house any circuitry. The photovoltaic (PV) panel, also called a solar panel, is what actually converts sunlight into electricity. It consists of numerous individual PV cells, which generate electricity when sunlight is incident upon them.The current produced by the PV cells is then transmitted through wires to the rechargeable storage battery. The battery stores the energy for later use, since additional artificial illumination is usually not required when there is plenty of sunlight.When required, the stored energy is then sent to the lamp, which may be switched on either manually or automatically. The lamp, mounted on the desired type of stand or fixture, then glows, thereby providing illumination.This technology is very versatile and has a wide variety of applications, from serving as decorative solar garden lighting to automated solar security lights. It's very easy to incorporate automation, such as light sensors, motion detectors, or timers that will automatically switch on the lights at a specified time or when it gets too dark or there is movement nearby.Benefits Of Solar Lights:As described in the previous section, each unit can be completely self-sufficient. Thus no wiring is required, since each unit is independent and does not need to be connected to a power grid. If you're considering solar garden lamps, for instance, this can save huge costs on long trenches for wiring, expensive insulation, and labour.Furthermore, the fact that solar lights aren't reliant on carbon-based electricity makes them eco-friendly. For any business, this is always a good statement to make, not to mention an excellent way of expressing social responsibility. Even for domestic use in homes, it makes great sense simply because it saves you on electricity bills!Applications:As discussed earlier, this is lighting technology may be used for many purposes. The lack of wiring makes it an excellent option for lighting in or around lakes, fountains or water bodies. It fits the bill for a solar shed light, and solar patio lights are also great for enhancing security for your porch or driveway.Even if the area where you want to install the light does not receive sufficient sunlight, you can still use solar lights by installing the PV panels in a different location. Of course, this has the drawback of requiring wiring between the panels, battery and the lamps. In the long run, however, it will still be more economical than conventional lights.
Improve the Looks of a Storage Shed
Many storage sheds are built in backyards, but never integrated into the yard itself. By that I meanmost storage sheds tend to look like an afterthought -- sort of like a "big box with a roof" fell from the sky and landed in the yard.This instructable focuses on how I started with a new storage building and integrated it into the overall landscaping of my backyard.The materials I used included:- 2x6 treated lumber for building a 5' x 12' deck - 2x6 treated lumber for the ramp - several concrete stepping stones to level the deck - shutters and window boxes for the storage building - approximately 20 bags of shredded wood mulch - steel landscaping edging - various landscaping plants - a drip irrigation system - primer & paint I didn't list the quantities of lumber & edging that I used, because that will vary depending on how large a person wants the deck, and what they need in terms of landscaping.In my case I began with a new, unpainted shed. So, my first task was to caulk all joints -- all except the underside of horizontal joints. You want to leave the underside of all horizontal joints open to prevent moisture from being trapped.I also calked each and every nail to prevent moisture from seeping in over time.Once all calking was dry, I put a coat of primer on the trim, followed by two coats of trim paint. The siding was pre-primed, so I simplyapplied two coats of exterior latex on it.Whether you are starting with a new shed or working with an old one, getting a good, protective layer of paint is critical. No shed looks good with peeling paint and rotting trim.I built the ramp from 2x6 treated lumber. I didn't make photos of its construction, but basically it consists of three tapered runners, with 2x6 decking. I made mine the width of the double doors, since I have to back a riding mower into the building.Adding a small deck to the side of a storage shed really helps to integrate its appearance into the rest of the yard -- helps to keep it from simply looking like it "fell from the sky." This deck is very simple. I made a "ladder" frame of 2x6 treatedlumber and decked it with the same material.I built this deck to run the length of thebuilding, and extend 5 feetfrom the side. It's not large enough to hold a party on, but it is large enough to visually tie the building into the yard.The final step in integrating the building into the yard is landscaping.In my case, I made a landscaping bed that extends around three sides of the building (the 4th side has the deck). The bed is bordered by landscaping timbers at the base of the fence, and heavy metal edging where it joins the rest of the yard.Before adding the mulch, I used weed preventing fabric on top of the soil, and installed a drip irrigation system. I topped it all off with 3-4" of mulch.Next I added various plants. On the right side I planted some screening shrubs that will eventually get 10-15' tall. For the next year or so I will prune these shrubs to look like trees, and within a few years these shrubs will screen that side of the building from the late afternoon sun.I also added two solar lights -- an interior light, and a motion-detecting security light.In the first photo you may have noticed that I put a sign on my building. I only did this to make my neighbors wonder what I'm up to!The goal of this project was to make the storage shed look like it belonged in the yard.The key to achieving this is to visually break up the lines where the building meets the soil. How I attempted to accomplish that objective was through the addition of the deck, the ramp, and the landscaping beds. Each of these tend to visually soften the "attachment" of the shed to the soil. Instead of looking as if the building just fell from the sky, it looks more like it grew naturally out of the ground. All of these elements just sort of tie it into the rest of the yard.Also, although you can't see it in the photos, the paint I selected for theshed matches the trim of the house. So, the shed is visually tied to both the landscaping and the house.Integrating a shed into a yard is not a difficult task, and it is a task that lends itself into small steps that can be done over a period of time. While this has nothing to do with the appearance of the shed, I did add some interior shelving. You may notice that several of the items stored inside are from instructables I have previously submitted.
The Application of Solar Street Light
Artificial intelligence (AI) has been used to help improve the efficiency of solar panel systems. It helps in correcting errors in the code of each individual solar panel and, as a result, improves the outputs of the panels.Outdoor Lighting Double Arms Pole Solar Street Light for City RoadWith excellent talents and leading technology, we provide domestic and foreign customers with high quality products for Solar Street Light Panel All in One Solar Street Light 50W and perfect customer service. Our vast global involvement in the industry has helped us gain a competitive edge that no other anode manufacturer has been able to achieve. Thanks to our experience and unique technology, we can provide customers with quality products at a competitive cost. We build our foundation with good faith, regard quality as life, and strive for in-depth cooperation with customers for common development. Double Arm Street Light Pole uses high-pressure die-casting aluminum for lamp housing, making the light acquire good anti-corrosion function and high strength. The whole structure of this light is simple for assembling, repairing and maintaining. Its hot dip galvanized with carbon coating pole also assure good rigidity and stability, able to withstand a long time of use. Also, we have carried out various outdoor experiments to make sure it performs well, so you do not have to worry it might be weak in quality. Double Arm Street Light Pole has good energy saving function, and it uses die-casting aluminum for the main body to ensure high strength, durability and good resistance to corrosion and sand friction. Its IP65 anti-water function makes sure it performs well in rainy weather. Its suitable working temperature is -60℃70℃, able to use in all-season times, suitable as both illumination and indication at night. Processed through advanced protocols and technology, it also achieves good mechanical properties and weight, not easy to be broken or deformed in outdoor sites. Q1: How long do LED Street Lights last? These lights also have reduced maintenance costs because of their long lives, and they give off less heat than other bulbs. Q2: What is the type of traffic light? A: These include: actuated signalized intersections; warning flashers and beacons; pedestrian signals; fire station signals; and, moveable bridge controls and warning systems. Traffic signals are used to promote the orderly movement of vehicular and pedestrian traffic and prevent excessive traffic delays Q3: Why do we need street lights? A: Street lighting provides a number of important benefits. It can be used to promote security in urban areas and to increase the quality of life by artificially extending the hours in which it is light so that activity can take place. Street lighting also improves safety for drivers, riders, and pedestriansWhat Is The Standard For Solar Street Lighting? | Socreat Electronics Technology LimitedIn recent years, with different countries support for the environmental protection industry, the development of solar street light industry is getting faster and faster. Along with the development, more and more solar street lights are on the market, but lots of problems are coming, uneven illumination and unreasonable light distribution etc. Why? Because the industry do not have standard. From the user's point of view, due to do not know the technology of solar street lighting, only a brief understanding of the market's simple mainstream configuration, such as: solar panel's watt, battery's capacity and led chip quantity. Therefore, these unreasonable parameters can only be used as selection standard. The user's choice determines the choice of the manufacturer. Because the industry lacks standards, users do not understand the market, and many unscrupulous manufacturers seize the market loopholes and use inferior materials and accessories, thus causing confusion in the industry. So what is the standard of solar street light? After in-depth thinking, Road Smart finally got an answer: The user did not purchase parameters, not configuration, not power, what the end uaser purchase is light. Road Smart finds out and defines a term that can measure the luminous ability of solar street lightings: the total amount of light emitted by the solar street light every night, and the unit is represented by "lmh". Light type - the shape of the light on the ground The photoelectric conversion rate is particularly scarce, so the light is very precious for solar street lightings. In order to maximize the use of light, Road Smart has been studying how to the reasonablly use light, reducing the waste of outside light. The patented lens was eventually developed, to perform secondary light distribution on the light. to make the light parallel to the road and improve light utilization. Uniformity - The brightest and darkest difference in the value of light on road Road Smart compare ordinary solar street lighting and Road Smart solar street lighting, get below data: ordinary street lamp 60 watt light source, center illumination 32lux, 7 meters illumination 5lux, 10 meters illumination 0lux. Through the comparison, Road Smart solar smart street lamp is superior to ordinary solar street lightings in terms of evenness. Road Smart took a lot of effort in the uniformity of the product, developed a number of patents, rationally allocated the light, solved the problems such as concentrated beam and obvious dark spots, and achieved the effect of larger irradiation area and more uniform illumination. In addition, through the data comparison, Road Smart solar smart street lamp is also significantly larger than the ordinary street lamp in the illumination area, and is highly visible at night, providing a better lighting environment for pedestrians. Color temperature - the color of light felt by human eye The color temperature of the light source is different, and the light color is also different. The light with low color temperature is yellowish, we call it warm colors. In terms of emotion, warm colors give people a warm feeling. In the role, the yellow light is good in fog. High color temperature light is white light, in emotion, in cold colors gives a visual sense of coldness, in effect, high color temperature white light for road lighting has an intermediate visual effect, good visibility, brighter than the low color temperature yellow light. However, if the color temperature is too high or too low, people will feel discomfort. In different environments, color temperature has different meanings in terms of emotion and function. Road Smart not only maintain the appropriate color temperature, but also have to adapt to different environments. Ra - the extent to which the light source restores the color of the object The higher the sign, the stronger the reduction of light, but the lower the brightness. Explicit means irrational, it will cause the poor light environment to create, and vice versa. Road Smart solar street lights is recommended to take a compromise, Ra≥70. Glare - The dazzling intensity of light felt by human eye Glare will cause visual fatigue, it will have a certain impact on the eyes and cause eye discomfort, glare may cause some danger when driving or outdoor sports. Therefore, no glare and anti-glare is a standard of light quality. Road Smart pursues the ultimate goal of light quality - to make the eyes more comfortable. In the development of solar street light products, it also pays attention to anti-glare and allows users to have a better light environment. Road Smart "Rs standard" tests solar street lightings based on the total amount of light radiation and the quality of light. The development of the industry requires standards, standards to regulate the industry, the industry can move toward the direction of standardization and standardization. Road Smart in solar street lighting industry is conscientiously adhering to the "Intelligent solar led street light" for corporate mission, is committed to storing and restoring the sun, so that street lamps are increasingly close to the sunlight effect. At present, Road Smart solar street lightings has lighted more than 120 countries. In the future, Road Smart will continue its efforts to bring more light to cities, will lead the solar lighting industry to develop in the direction of smart standardization, promote global green energy development.
31 DIY Home Projects Under $30 You Need to Try This Spring
Spring is the season of flowering plants, warmer weather and getting things done. Do-it-yourself projects offer a lot of bang for the buck when it comes to upgrading your home, and it can be fun. Many projects can be completed in an afternoon and are easy enough that the kids can help.Click through to discover budget-friendly DIY projects that will cost you less than $30.1. Fruit Slice Welcome MatAdd a playful pop of color outside your front door with a DIY fruit slice doormat. To make the doormat, purchase a semicircle doormat that doesn’t have a textured design on it. Home Depot, Target and Walmart have good deals on home goods. It doesn’t matter if the mat has words or printing on it since you’ll paint over it anyway — so go with the cheapest one you can find.Place the doormat on a tarp outside, spray paint the mat white and let it dry, then spray paint the mat to resemble a slice of watermelon or your favorite citrus fruit. Make paper or tape stencils to block off specific areas of the fruit design, such as the rind, as you add each color, suggested the design blog The House That Lars Built.The total estimated cost for a fruit slice welcome mat is $28.95, assuming you have paper or tape for stencils. Here’s what you’ll need:Semicircle doormat: $17.99Tarp: $2.82White spray paint: $4.28Colored spray paint: $3.862. Upgrade a Window ShadeStandard bamboo or vinyl window shades do a great job when it comes to providing privacy, but their looks leave a bit to be desired. To complete this DIY home renovation, take a bland window shade and stencil a new design, such as a series of birds or a large birdcage, over the side facing in, according to Country Living.Make your own stencil by drawing a design on contact paper, then cutting out the areas you want to paint onto the shade. Peel and stick the contact paper stencil on to the shade, then dab acrylic craft paint over the cut-out areas with a brush, paintbrush or sponge. This project can be done with the shade on the window, but it is easier to remove the shade and set it on a tarp on the floor instead.The total estimated cost for upgrading a window shade is $20.45, assuming you already own the shade. Here’s what you’ll need:Tarp: $2.82White adhesive contact paper: $3.86Six-pack of acrylic craft paint: $8.80Package of paint brushes: $4.973. Birdseed RingsSpring brings with it lots of lovely things, including varieties of birds in your backyard. Keep them happy — and fed — by making birdseed rings to hang from a tree within view of a window so you can enjoy the experience, too. According to Corner Blog, boil one cup of water, then pour it into a large metal or glass bowl. Stir in three packs of unflavored gelatin and five cups of a birdseed blend that contains large seeds such as sunflower seeds.Grease two six-doughnut baking pans with vegetable oil, then fill one with the birdseed blend, mounding the seed mixture to create a doughnut shape. Place the second tray over the first, hole side down, then clamp the pans together with binder clips. Set the pans in the refrigerator to cool for four hours or longer, then remove the seed rings and hang them outdoors with natural twine.The total estimated cost for creating birdseed rings is $22.47, assuming you have a large metal or glass bowl. Here’s what you’ll need:Doughnut pan: $9.97Bag of birdseed: $4.74Box of unflavored gelatin packets: $2.24Vegetable oil: $2.28Twine: $3.244. Magnetic Spice RackYou could buy this well-liked spice rack at IKEA, but you also can keep spice jar clutter under control with a DIY magnetic spice rack that’ll spice things up. Visit a home improvement store and select a piece of magnetic sheet metal that is small enough to fit the side of a kitchen cupboard or inside a cupboard door, according to Garden Betty. To cut the metal sheet, use tin snips.Purchase a set of good quality four-ounce tins from a craft store, then epoxy strong magnetic discs to the bottom of each. Print out sticky labels for each spice you own, then apply one label to each jar lid. Secure the sheet metal to the desired location with construction adhesive, screws or adhesive strips.The total estimated cost for a magnetic spice rack is $27.90, assuming you have epoxy glue and, if needed, tin snips. Here’s what you’ll need:Metal sheet, 12 inches x 24 inches: $11.9910 four-ounce tins with lids: $7.6012 disc magnets: $6.68Self-adhesive labels: $1.635. Tame Cabinet ClutterCutting boards, cookie sheets and platters are difficult to stack neatly inside a kitchen cupboard, resulting in a clattering mess. Martha Stewart’s website suggested getting your clutter under control by installing tension rods vertically between one shelf and the next. Slide those cookie sheets and other large, shallow items between tension rods to keep cupboard clutter under control.The total estimated cost to tame your cabinet clutter is $11.39. Here’s what you’ll need:Five-pack of cupboard tension rods: $11.396. No-Sew Coffee Sack Cafe CurtainYou can make your own cafe curtain or window valance, ideal for the window near the kitchen sink, from an old burlap coffee or flour sack, according to decorating blog Funky Junk Interiors. Choose part of the sack that has graphics on it for the most visual impact. Cut the burlap as wide as the window, then cut the length to a short cafe curtain or valance size, adding two extra inches.Fray the sides and bottom of the burlap by pulling threads out to give it a well-worn look. Glue the top edge to a dowel rod cut to fit into curtain rod holders installed near the top of the window. For more opaque curtains, add another fabric to the back of the liner using fabric glue.The total estimated cost for a no-sew coffee sack cafe curtain is $21.23. Here’s what you’ll need:Burlap coffee sack: $5.99Dowel rod: $7.25Curtain rod holders: $7.997. Revive Your Solar LightsSolar lights offer an excellent — and movable — source of lighting around your walkways and flowerbeds, but they tend to malfunction after being left out in the changing weather season after season. Often, the malfunction is due to dirty, cloudy plastic over the solar panel.Fortunately, you can avoid wasting your money on replacements. Instead, revive those dingy solar lights by first wiping them down with a soft, damp cloth — especially the solar panels. Once they’re dry, apply a coat of clear nail polish over the solar panel area to revive and protect it. The lights should work like new once again. A bottle of nail polish is rather small so make sure to grab as many as you’ll need for the number of lights you have.The total estimated cost for reviving your solar lights is $9.90, or the cost of five bottles of nail polish. Here’s what you’ll need:Clear nail polish: $1.98 per 0.5 fluid ounces8. Outdoor Terra Cotta Table‘Tis the season for enjoying nice weather out on the patio, porch or deck. You can create your own terra-cotta storage table to use next to your outdoor furniture.Buy a large terra-cotta pot and a planter tray that fits the top without falling inside. For a lighter version, purchase a durable fiberglass plant pot and matching tray instead. Paint the rims of the terra-cotta pot and tray to match your patio furniture cushions using exterior paint. Once dry, set the pot where you wish to add a table, then set the tray on top of the pot.The total estimated cost for an outdoor terra-cotta table is $24.59. Here’s what you’ll need:Large terra-cotta pot with tray: $19.98A pint of exterior paint: $4.61Save on Supplies: Secret Ways to Save Money at Home Depot9. Fabric-Covered CorkboardYou can give a plain IKEA corkboard — or any framed corkboard — an adorable upgrade by covering it with a patterned fabric. Pop the cork out of the frame, if possible, then wrap a piece of the fabric around the front of the cork sheet. Set the fabric-covered cork back into the frame, then outline the fabric with decorative tacks.If the fabric won’t fit around the cork or the cork cannot be removed from the frame, simply fold the fabric around each edge to create a neat false hem, ironing the fabric. Tack the perimeter of the taut fabric to the corkboard.The total estimated cost for a fabric-covered corkboard is $29.33 or less depending on fabric cost. Here’s what you’ll need:IKEA Vaggis Noticeboard: $5.99One yard of fabric: Up to $21.99Package of steel tacks: $1.3510. DIY Fabric Wall ArtCreate your own patterned wall art that’s simple to assemble and lightweight, too, suggested CraftsNCoffee. Wrap patterned fabric or even decorative gift wrap around sheets of hard foam cut into rectangles or squares.Attach the fabric to the foam by wrapping each foam piece as if wrapping a gift, then either tape or tack the fabric to the back of the foam. Hang the art pieces in a grouping on the wall, using hook-and-loop picture hangers.The total estimated cost for DIY fabric wall art is $28.18 or less depending on fabric cost. Here’s what you’ll need:Foam board: $12.85One yard of fabric: $13.99Package of steel tacks: $1.3411. Pounded-Grass PlacematsCelebrate the season of green with a set of DIY pounded-grass placemats. Purchase a set of plain linen or light-colored cotton placemats and a tray of live wheatgrass, which can be found at natural markets and some grocery stores, according to MarthaStewart.com.To create the grassy designs, trim blades of wheatgrass several inches long, then arrange the blades next to one another along one edge of each placemat. Set a piece of cardstock over the grass to keep it in place, then pound the cardstock gently with a mallet or hammer. Remove the cardstock and grass to reveal the design. This design will eventually fade after several washes.The total estimated cost for pounded-grass placemats is $29.00. Here’s what you’ll need:Set of two linen placemats: $19.00Wheatgrass: $10.0012. Wool CoastersInstead of wondering what to do with your old shrunken or stained wool sweaters, Good Housekeeping suggested transforming them into drink coasters. Wash the woolens in hot water, then dry them on high heat with hefty laundry items such as jeans.After several wash-and-dry sessions, the wool transforms into felt. Trace the mouth of a wide mug onto the wool several times, cut out the discs and you have a new set of wool coasters. Thrift-store wool sweaters are ideal for this project. With a project this easy, kids might even enjoy creating their own coasters from old sweaters.The total estimated cost for wool coasters is $0 as long as you have a washer, dryer and an old sweater.13. Dip-Dye Ombre PlantersYou can ombre and dip-dye items to add a trendy, fresh look to your home, according to craft blog I SPY DIY. Upgrade a series of plain white ceramic planters by dip-dyeing them in liquid designed for tie-dyeing fabric.To create the ombre or fade effect, mix the tie-dye solution according to package directions, then dip a pot halfway in, holding it for five seconds or until you see a bit of color. Dip the pot again, not quite as far, and hold it for 10 seconds. Repeat a third time, holding it even longer to create a darker shade of the same color.The total estimated cost for dip-dye ombre planters is $24.26. Here’s what you’ll need:Set of two hexagonal white ceramic planters: $16.99Eight-ounce bottle of dye: $7.2714. Washi Tape Picture FramesInstead of framing your photos and hanging the frames on the wall with nails, you can make your own Washi tape frames instead, according to Design*Sponge. Washi tape, a more decorative cousin to masking tape, comes in a variety of colors and patterns that are perfect for wall decor. Apply the tape in geometric shapes around each photo, or overlap washi tape colors for a playful effect.The total estimated cost for Washi tape picture frames is $14.99. Here’s what you’ll need:Assorted Washi tape: $14.9915. Veggie-Themed Shopping BagHelp protect the environment by making and using your own vegetable-themed fabric shopping bag. Purchase a plain but durable canvas or muslin tote bag, then print a cute vegetable-themed design onto iron-on transfer paper.Download free printable vegetable graphics online. Cut the design out around the graphics, then iron the design onto one side of the bag following directions on the iron-on package. Once the bag cools, peel the iron-on paper away to reveal your design. Now you’re ready to hit the market for fresh foods.The total estimated cost for a veggie-themed shopping bag is $16.44. Here’s what you’ll need:Plain canvas bag: $5.95Package of iron-on paper: $10.49Must-Read: Why You Should Buy These 20 Fresh Ingredients in Spring16. Potato-Printed Table RunnerCreate your own custom-themed table runner for spring using the ultimate inexpensive stamp material: a potato. Design*Sponge suggested choosing a plain table runner made from a natural fabric such as cotton or burlap, then spreading it out on a plastic tablecloth or sheet of cardboard.Cut a potato in half, then carve a simple design such as a tulip bulb using a paring knife, removing the potato area around the tulip to create a stamp. Brush fabric paint over the surface of the stamp, then dab the potato stamp onto the table runner, repeating the process as often as you’d like to complete the design.The total estimated cost for a potato-printed table runner is $7.66. Here’s what you’ll need:Burlap runner: $4.29Fabric paint: $3.3717. Typography Throw PillowCreate your own customized pillow by upgrading a throw-pillow cover with a favorite saying, monogram or simple graphic design. Print out the desired lettering or design on paper, cut the design out, then trace around it onto the pillow cover using a chalk fabric pencil, according to the blog Love, Pomegranate House.Paint inside the lines with acrylic craft paint or fabric paint, placing cardboard inside the pillow cover to prevent bleed-through. Place the cover back on the pillow after the paint dries. This technique can also be used to customize pillowcases and bed sheets.The total estimated cost for a typography throw pillow is $14.35. Here’s what you’ll need:Throw pillow cover: $4.99Chalk fabric pencil: $5.99Fabric paint: $3.3718. Thrift Store Table MakeoverUpgrade a thrift-store table or bench with a fresh coat of paint and a vintage design such as an antique key advertisement, suggested Art Is Beauty. Gently sand the table, wipe the dust away, then paint it in a spring color such as Pantone’s Greenery.Create a transfer of the vintage ad design by printing it on an inkjet printer in reverse on the waxy side of freezer paper. Set the image wax-side down on the table, then burnish it with the edge of a spoon or a gift card, being careful not to let the paper move. Carefully peel the paper away once complete.The total estimated cost for a thrift-store table makeover is $9.26. Here’s what you’ll need:Fine grit sandpaper: $5.77Freezer paper: $3.49Read: 10 DIY Beauty Products for Home Use19. Stenciled Raindrop BenchTransform a boring bench or even a wooden porch table with an adorable raindrop theme, just in time for spring. Design blog The 36th Avenue suggested painting the bench or table in your favorite acrylic or latex spring shade, such as a cheery green or sky blue.Once the paint dries, place a large raindrop stencil on top of the project piece and tape it down with painter’s tape. You can make the stencil yourself by drawing designs on card stock and cutting out the raindrop shapes, or purchase a premade stencil from a site such as Handmade Charlotte. Dab white acrylic craft paint over the holes in the stencil, then remove the stencil and tape once the paint dries.The total estimated cost for a stenciled raindrop bench is $15.32. Here’s what you’ll need:One half-pint of latex paint: $9.25Painter’s tape: $2.97Acrylic craft paint: $3.1020. Giant Water BlobIf you want to beat the heat but don’t have a pool, DIY blog Homemade Toast showed a unique way to cool off by creating a giant leakproof water blob. Purchase a 4-millimeter or thicker painter’s plastic sheet twice as long as you’d like the blob to be. Spread the plastic on the floor on a sheet of cardboard, folding the plastic in half. Fold a large piece of parchment paper in half, crease it and mark it at two inches from the fold line.Slide the sheet of parchment paper along the open edges of the plastic, then iron on top of the parchment paper on the highest heat setting — no steam — to seal the plastic. Continue sliding the parchment down the edge of the plastic and iron until you’ve created a seam. Then, seal the sides, too.Take the plastic outside to a rock-free area of the yard, spread it flat, then cut a small slit in the folded edge large enough to insert a garden hose. Fill the plastic with water while holding the cut end up. Add a capful of bleach, seal the slit with duct tape and the blob is ready to use.The total estimated cost for a giant water blob is $15.22, assuming you have a small amount of bleach. Here’s what you’ll need:4-millimeter plastic drop cloth: $6.77Parchment paper: $3.48Duct tape: $4.9721. Jelly Bean Door MonogramCreate a one-of-a-kind monogram to display on your front door or mantel using a craft store cardboard monogram letter and your favorite color of jelly beans. This display is great for Easter, but it’s also seasonal enough to bring smiles to your guests’ faces all spring long.Better Homes and Gardens suggested painting the letter in a backing color similar to the jelly beans of your choice. Once the paint dries, hot-glue jelly beans to cover the surface of the letter completely. Take the piece outdoors and set it on a plastic tarp, then spray an acrylic clear coat over the jelly beans to preserve them. Hot glue a loop of ribbon to the back of the monogram to hang it from a nail on the door, or prop it up on a mantel shelf to display indoors.The total estimated cost for a jelly bean door monogram is $18.10 assuming you have a hot glue gun, hot glue and a small piece of ribbon. Here’s what you’ll need:Cardboard monogram letter: $1.97Bag of jelly beans: $5.99Craft paint: $3.36Tarp: $2.82Acrylic clear coat spray: $3.9622. Solar Fence LightsUpgrade your fence with a series of lanterns that look expensive but aren’t, using this idea from Running With Scissors. Lantern-shaped solar lights from a discount store serve as the sources of light. Attach decorative metal plant-basket hangers on fence posts for even spacing. Hang the solar lanterns from the plant hooks.The total estimated cost for solar fence lights is $24.17. Here’s what you’ll need:Set of two solar lanterns: $18.39Two plant hangers: $5.78Worth Doing: Home Renovations That Will Pay You Back23. Old Rake Tool HangerOld metal garden rakes with lost or broken handles aren’t completely useless, according to DIY blog Art Stuff. Give that old rake head new life as a holder for small garden tools such as spades and weed pullers. Hammer two nails parallel to one another on the side of a shed or on a board in the garage to hang the rake head. Hang each garden tool from a tine or prong on the rake, using loops of leather shoelace material to hang each piece.The total estimated cost for an old rake tool hanger is $5.75. Here’s what you’ll need:Spool of natural leather cord: $5.7524. Cement PlantersIf you’re planting a budget-friendly garden this year, you’ll want some equally frugal planters.Store-bought planters tend to either be boring or too pricey if you need a number of them. Make your own, completely unique planters out of cement instead, using this idea from Remodelaholic. Disposable plastic containers, bowls or even milk cartons serve as the molds for your planters.Mix Portland cement in a bucket according to directions on the bag, then pour a layer at least 1/2-inch thick into the larger of your mold-making materials. Place plastic wrap over the outside of the inner mold form, and then place the inner mold form on top of the wet cement, then pour in more cement until it nearly reaches the top of the outer mold form. Once it dries, remove the inner form and smooth the cement with a rock or sandpaper.The total estimated cost for cement planters is $9.99. Here’s what you’ll need:One bag of Portland cement: $9.9925. Hand-Painted Plant MarkersSpring is the time to get that garden started, but once the plants start to sprout, it might be difficult to remember which vegetable is which. Solve the problem with a set of hand-painted stone plant markers, according to handmade toy blog Adventure in a Box.Find and clean several smooth stones, opting for ones that resemble the shapes of carrots, eggplant or other vegetables you’ve planted. Paint their tops to resemble the planted vegetables, or paint the name of each plant on each stone and set them in the garden immediately after planting the seeds or seedlings.The total estimated cost for hand-painted plant markers is $12.40 for four different colors of paint, assuming you have or can find stones. Here’s what you’ll need:Acrylic craft paint: $12.4026. Repurposed Chandelier PlanterTransform a thrift store chandelier into a cheerful planter to hang on the porch or in the sunroom using just a few inexpensive supplies. Remove all the electrical wiring from the chandelier plus the candlestick-style light sockets and holders, according to home improvement blog DIY Show Off.Purchase plastic plant pots and trays — one set for each arm of the chandelier — in a size that fits on each arm. Glue the plant trays and pots to the tops of each chandelier arm, then spray paint the entire assemblage in your favorite cheery spring color once the glue dries. Add potting soil and plants, hang the chandelier from a sturdy plant hook and your work is complete.The total estimated cost for a repurposed chandelier planter is $28.07 assuming you already have an old chandelier. Here’s what you’ll need:Colored spray paint: $3.86Six plastic planters: $6.30Potting soil: $2.73One half-flat of flowering perennials: $15.1827. Melted Crayon ArtPerfect for a rainy spring afternoon, Decoist’s DIY melted crayon wall art is a project that’s fun for all ages. Arrange new crayons at the top of a clean art canvas, tips pointing down, or in any pattern you prefer. Hot-glue the crayons to the canvas one at a time.Once the glue dries, set the canvas on a plastic tarp and aim a hair dryer set to hot at the crayons until they begin to melt. Feel free to angle the canvas different ways to achieve the desired drip effect.The total estimated cost for melted crayon art is $17.08. Here’s what you’ll need:120 crayons: $7.18Three-pack art canvas: $7.08Tarp: $2.8228. Garden Tic-Tac-ToeCreate a fun — and functional — addition to your garden or yard with a tic-tac-toe stepping stone set using this idea from homesteading blog Northwest Edible Life. Purchase nine square pavers and set them in your yard in a three-tile by three-tile square, leaving an inch or so between pavers.Dig out some of the dirt beneath each paver to make the pieces lay flat. Find and clean 10 smooth stones of similar size, then paint an X on half of them and an O on the rest using acrylic craft paint. The kids can find the rocks, paint them and put the tic-tac-toe board.The total estimated cost for garden tic-tac-toe is $23.29. Here’s what you’ll need:Nine square pavers: $21.33Two colors of acrylic craft paint: $1.9629. Floral Fairy LightsTransform a string of plain outdoor party lights into a festive floral display by adding silk flowers to each LED light. To create the look, seek out silk or fabric flowers such as cherry blossoms at your local craft store, buying enough to fit one flower per bulb on the light strand.Pull the flower portion off its stem or faux leaves, then slide the hole in the center of the flower over a light bulb, pushing it down past the bulb as far as possible. If the flowers seem loose, apply a dab of hot glue to each to secure them to the light strand.The total estimated cost for your DIY floral fairy lights is $17.95. Here’s what you’ll need:Outdoor party lights: $11.29Silk flowers: $6.6630. Rainbow Beaded Wind ChimesSpring brings with it plenty of breezy weather — perfect for enjoying the sound of wind chimes. DIY blog Garden Therapy suggested making your own beaded chimes by drilling holes one inch apart through a found driftwood stick or a dowel, making one hole for each strand of beads you wish to use. Purchase a bulk pack of colorful, translucent beads in assorted colors and styles.Tie a small bell on one end of a strand of fishing line or beading cord, then slide beads of one color onto the cord, repeating the process for as many chimes as you wish to make. Push the top end of the string through the bottom of the hole in the driftwood, then tie a bead to the top to keep the chime strand in place. Repeat for each strand, then wind colored twine to create a hanger for the chimes.The total estimated cost for rainbow beaded wind chimes is $9.26. Here’s what you’ll need:Bulk pack of assorted beads: $4.24Beading cord: $1.24Three-pack small jingle bells: $3.7831. Faux Painted RugMaking use of outdoor areas is a popular way to entertain — or just relax — in spring. Add some color and interest to your concrete patio with the addition of a painted rug. Better Homes and Gardens suggested measuring the size of the area you want to paint. Mark the outer edges of the rug with painter’s tape before beginning to paint. Roll two coats of white concrete paint onto the concrete in the taped-off area as a primer. Allow the paint to dry.Mark color bands and blocks with painter’s tape inside the original tape border. Paint each section as desired. After the paint has dried, you can use stencils to decorate the color bands and blocks to add more dimension. Once the entire rug is dry, spray it with concrete sealer.The estimated cost for a faux painted rug is $26.56. Here’s what you’ll need:Painter’s tape: $2.97Two 8-ounce cans of white concrete porch paint: $9.38Three colors of acrylic paint: $5.22Clear satin concrete sealer: $8.99Click to find out how you can increase your home’s value with these DIY remodeling projects.Photos are for illustrative purposes only. As a result, some of the photos might not reflect the [insert product here] listed in this articleCynthia Measom contributed to the reporting for this article.This article originally appeared on GOBankingRates.com:
Lithium Battery All in One Solar Street Light Leads the New Revolution in Road Lighting
In recent years, the lighting industry has undergone earth-shaking changes. First, LEDs have replaced traditional high-pressure sodium lamps. Recently, all in one solar street light have replaced traditional urban circuit lights. However, all in one solar street light have undergone revolutionary technological changes.As we all know, all in one solar street light are collected by solar panels during the day, stored in the battery, and then used for night use. In the past, we used lead-acid batteries and colloidal batteries. With the lithium batteries in recent years. Mature technology, lithium battery all in one solar street light gradually replace the traditional gel battery.In terms of advantages, what are the benefits of lithium batteries? Easy to maintain, light and environmentally friendly.In terms of longevity, how long is its life expectancy? Lithium battery is divided into lithium power and ordinary lithium battery. To be exact, the life of a good lithium battery is 3-5 times that of a conventional gel battery!In terms of price and cost, the cost of lithium batteries and the cost of colloids are almost the same. Lithium battery have Longer life and more durable than colloids battery! In addition to the above advantages, lithium batteries also have the following five advantages:Has a high storage energy density. The lithium battery in solar led lightshas a high energy density compared to other batteries, and has reached 460-600 Wh/kg, which is about 6-7 times that of lead-acid batteries.This means that the lithium battery is lighter in weight at the same charge capacity. It is calculated that the weight in the same volume is about 1/5-1/6 of the lead acid product.Lithium battery is a storage battery with controllability and pollution-free. In addition, lead-acid battery solar led lights are often criticized during use, and the service life is short.The service life of lithium battery solar led lights is generally more than 10 years, and the service life of LED light sources is generally up to 10 years (about 50,000 hours), which can perfectly match the system perfectly.Lithium battery solar panel lightscan also intelligently calculate and calculate the remaining battery capacity, day and night time, weather conditions and other factors according to user needs, and reasonably distribute the power level, and realize the functions of light control, time control and storage memory, etc. The day is lit by continuous rainy days.High and low temperature adaptability. The lithium battery can be used in the -45-60 environment, and it can be used in the -45 environment after the process.Lithium battery is safer. Lithium battery is a dry battery, which is more stable and safer than lead-acid batteries.The above is about the advantages of lithium battery solar panel lights. The development of technology has promoted the development of the solar panel lights industry. Nowadays, the application of lithium batteries in solar street lamps is a revolutionary change for the solar pole lights industry, greatly reducing The cost has increased the life of solar pole lights. Lithium battery solar pole lights are leading the new revolution in road lighting!·RELATED QUESTIONWhat's the meaning of Sia's Chandelier song?Before Chandelier, Sia was a singer with mediocre success.She was really struggling to push her career when she lost her partner to an accident. She got addicted to drugs, suffered depression and even wrote a suicide note. Drugs and alcohol were her only coping mechanisms. This song is about the time she was addicted to alcohol and drugs and her struggle to get out of it.In an interview, Sia said that she always knew she was a drinker and that she must stop, her guilt, shame is what the following lyrics suggest:-Sun is up, I'm a messGotta get out now, gotta run from thisHere comes the shame, here comes the shame.. but, out of peer pressurephones blowing up, they're ringing my door bells, I feel the love..she did not stop.1,2,3 ... 1,2,3 drinkthrow them back till I lose countThe only time she could escape from reality was when she was high, under the influence of alcohol and drugs. She could be carefree, live like tomorrow didn't exist.I'm gonna swing from the chandelier, from the chandelierI'm gonna live like tomorrow doesn't existLike it doesn't existI'm gonna fly like a bird through the nightChandelier is ultimately a brutally honest tale of substance abuse.Sia wrote the song for Rihanna but I am so glad that she kept this one for herself.
Outdoor Solar Lighting
Solar outdoor lighting will charge throughout day, during the sunlight. Then as the nightfall returns, these lights will come on. Even though outside solar lights are slightly more of upfront then the average low voltage outdoor home lighting, they will have different rewards. The most effective being the availability of all the different styles and designs of the out-of-door solar light.One of the best features is the simpleness of installment. Without the need of electric cords or electricity and wiring, the wage of an electrician may be avoided. One of the greatest feature is of course subsequently being put in, there may be no addition to the electric bill. After soaking up the sunlight all day, the solar out-of-door lighting will automatically turn itself on at dusk and turn itself off at sunup.For the out-of-door deck lighting, the solar deck lighting will be obtainable in several sizes to fit on top of the assorted sizing of vinyl or wooden deck posts. These will help to make any deck secure and safe. Constantly keeping your deck in impressive light ready for use any time during nighttime. Likewise the solar mount wall lighting could be stationed with ease by the homeowner without requiring the assistance of the electrician. These will easily be attached to most any outside deck, wall or even any outdoor post. These can also increase value to your property creating a safe and secure appearance.A different special means to assist with added security measures to the exterior of the household or apartment could be to install the solar out-of-door path lights. What a charming way to spotlight the direction to the doorway also being able to point out whatever hazards that may be present such as any irregular sidewalk or landscaping. Another means to contribute a little something different to your outdoor garden lighting is to add the solar powered rocks or perhaps the solar powered flower lighting. If you own a pond, pool or waterfall, adding some of the solar floating lighting may contribute numerous intriguing effects with a wide variety of styles and colors to choose from. Several of these could even have the LED out-of-door lights that will permit for the coloring changing of lights. There is a large diversity of outdoor garden solar lighting to illuminate any size space you own.Do not forget the usage of solar spot and flood lighting. These could be used in a large-scale array of styles and designs including the wall mount and solar garden spot light that are a great way to direct lighting onto a sign or building. The function of commercial solar post lamps may be used to illuminate side walks and parking lots at no electrical cost. And do not forget that a good deal of the outside Christmas lighting are now available in the out-of-door solar lights.
no data

Contact Us

Copyright2021@KemecoLighting

Service Support

kemeco@kmc-ltd.com

 Copyright © 2021 Kemeco |Sitemap